Parting tool holder

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
RSG
Posts: 1546
Joined: Fri Feb 04, 2011 9:59 am
Location: Ontario, Canada

Re: Parting tool holder

Post by RSG »

The only place I know of is here in Canada at Busy Bee Tools, that's where I got mine. They have a few sizes to choose from and I think they do mail order cross border.

https://www.busybeetools.com/products/i ... b3336.html
Vision is not seeing things as they are, but as they will be.
Top
Mr Ron
Posts: 2126
Joined: Tue Dec 22, 2009 12:36 pm
Location: Vancleave, Mississippi

Re: Parting tool holder

Post by Mr Ron »

Busy Bee does not ship outside Canada.
Mr.Ron from South Mississippi
Top
Inspector
Posts: 721
Joined: Mon Feb 23, 2009 4:25 am
Location: Saskatoon, SK, Canada

Re: Parting tool holder

Post by Inspector »

Grizzly and Busy Bee are related by blood so lots of what Busy Bee carry are also sold by Grizzly. They seem to have similar parting tools.

https://www.grizzly.com/products/Grizzl ... ade/T10376

https://www.grizzly.com/products/Grizzl ... ert/T10012

Pete
Top
SteveM
Posts: 7767
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Parting tool holder

Post by SteveM »

Inspector wrote: ↑Wed Feb 19, 2020 7:09 pm Grizzly and Busy Bee are related by blood so lots of what Busy Bee carry are also sold by Grizzly. They seem to have similar parting tools.

https://www.grizzly.com/products/Grizzl ... ade/T10376

https://www.grizzly.com/products/Grizzl ... ert/T10012

Pete
They are really short on specifications. I can't even tell of it's a GTN2 or 3.

Steve
Top
RSG
Posts: 1546
Joined: Fri Feb 04, 2011 9:59 am
Location: Ontario, Canada

Re: Parting tool holder

Post by RSG »

That's good that Grizzly carries them. Steve, perhaps an email to Glanze directly will answer which insert style it is.
Vision is not seeing things as they are, but as they will be.
Top
whateg0
Posts: 1114
Joined: Sat Mar 28, 2009 3:54 pm
Location: Wichita, KS

Re: Parting tool holder

Post by whateg0 »

SteveM wrote: ↑Wed Feb 19, 2020 11:01 pm
Inspector wrote: ↑Wed Feb 19, 2020 7:09 pm Grizzly and Busy Bee are related by blood so lots of what Busy Bee carry are also sold by Grizzly. They seem to have similar parting tools.

https://www.grizzly.com/products/Grizzl ... ade/T10376

https://www.grizzly.com/products/Grizzl ... ert/T10012

Pete
They are really short on specifications. I can't even tell of it's a GTN2 or 3.

Steve
According to the first page, they are GTN3.
gtn3.jpg
Dave
Top
SteveM
Posts: 7767
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Parting tool holder

Post by SteveM »

whateg0 wrote: ↑Thu Feb 20, 2020 10:26 am According to the first page, they are GTN3.
gtn3.jpg
Dave
I was looking at the other one.

It says 3/32", which works out to 2.4mm, so neiher a GTN2 nor GTN3


Steve
Top
John Evans
Posts: 2366
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: Parting tool holder

Post by John Evans »

Blade has to be thinner than the insert for clearance. So GTN 3 should be 3MM wide right?
www.chaski.com
Top
SteveM
Posts: 7767
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Parting tool holder

Post by SteveM »

John Evans wrote: ↑Thu Feb 20, 2020 5:39 pm Blade has to be thinner than the insert for clearance. So GTN 3 should be 3MM wide right?
It says the insert is 3/32", not the blade.
There actually are GTN2.4 inserts.

Steve
Top
whateg0
Posts: 1114
Joined: Sat Mar 28, 2009 3:54 pm
Location: Wichita, KS

Re: Parting tool holder

Post by whateg0 »

I'll be in Springfield week after next if there's any tools you want me to check out.
Top
SteveM
Posts: 7767
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Parting tool holder

Post by SteveM »

whateg0 wrote: ↑Fri Feb 21, 2020 6:24 pm I'll be in Springfield week after next if there's any tools you want me to check out.
Don't tempt me!

Steve
Top
whateg0
Posts: 1114
Joined: Sat Mar 28, 2009 3:54 pm
Location: Wichita, KS

Re: Parting tool holder

Post by whateg0 »

An ad popped up today for msc selling gtn2.4 inserts. Google is really smart.

https://www.mscdirect.com/browse/tnpla/08690281?

Dave
Top
Post Reply

Return to “General Discussion”