Hi Guys, needed to make brass plugs with an internal 10mm Hex.
Made this rotary broach, the most difficult aspect was to grind the cutter without a tool and cutter grinder.
Improvised by using my mill drill, made a spindle lock and a jig to hold my die grinder and ground the tool, happy with the result although tedious cranking the "Y" axis by hand.
Home Made Rotary Broach.
Re: Home Made Rotary Broach.
Well done! It's amazing the things one can do with just a little imagination.
H
H
Wise people talk because they have something to say. Fools talk because they have to say something.
Re: Home Made Rotary Broach.
Thanks Harold, I thoroughly enjoy making things in my shop, especially now in these trying times, keeps the mind active.
Re: Home Made Rotary Broach.
Smart idea! I'll have to remember that!
Vision is not seeing things as they are, but as they will be.
- 737mechanic
- Posts: 373
- Joined: Thu Jun 04, 2009 6:27 pm
- Location: Dallas
Re: Home Made Rotary Broach.
I have been wanting to make one myself for years but have not got around to it. Good Job.