Battleship New Jersey Machine Shop - A Closer Look

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
User avatar
Bill_Cook
Posts: 535
Joined: Sat Jan 04, 2003 10:28 pm
Location: Walnut Bottom, PA, USA

Battleship New Jersey Machine Shop - A Closer Look

Post by Bill_Cook »

If I was offered a choice of just one machine, I'd have a tough time of it.

https://www.youtube.com/watch?v=UBsxd4TrT4M
BC

If there was only one way to do each machining job, the smell of sulphurized cutting oil smoke would have fewer fond memories.
User avatar
Steggy
Posts: 1976
Joined: Tue Jun 28, 2011 9:19 pm
Location: JB Pritzker’s Hellhole
Contact:

Re: Battleship New Jersey Machine Shop - A Closer Look

Post by Steggy »

I'm getting that deja vu feeling all over again. :D
———————————————————————————————————————————————————————
Music isn’t at all difficult.  All you gotta do is play the right notes at the right time!  :D
User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Battleship New Jersey Machine Shop - A Closer Look

Post by NP317 »

You can say that again!
RussN
User avatar
Steggy
Posts: 1976
Joined: Tue Jun 28, 2011 9:19 pm
Location: JB Pritzker’s Hellhole
Contact:

Re: Battleship New Jersey Machine Shop - A Closer Look

Post by Steggy »

NP317 wrote: Sun Feb 28, 2021 10:12 am You can say that again!
RussN
:D :D :D
———————————————————————————————————————————————————————
Music isn’t at all difficult.  All you gotta do is play the right notes at the right time!  :D
User avatar
Bill Shields
Posts: 10460
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Battleship New Jersey Machine Shop - A Closer Look

Post by Bill Shields »

It is a no brainer...take the 10" monarch lathe
Too many things going on to bother listing them.
Post Reply