Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.
Moderators: Harold_V, websterz, GlennW
- Posts: 12
- Joined: Sat Jan 04, 2003 5:16 pm
- Location: Dakota Co., MN
I bought a Jet-16 12 speed mill/drill. On the right side of the quill is a zerk fitting. Is the zerk fitting use for grease or like on a Bridgeport, is the zerk fitting used as an oil lube point?