Just a heads up guys, nothing to do with me but I feel the following post will be of interest to many.
***********************
I have been adding information to my Shaper CD and am finally ready to
announce the new greatly expanded version.
Cost is now $10.00, mostly due to the vast amount of time invested in
scanning. Payment of cash, money order or personal check may be sent
to
Errol Groff
180 Middle Road
Preston, CT 06365 8206
PayPal is also welcome to errol.groff@snet.net
No extra charge shipping to Canada (eh) or other international
addresses.
What does your $10.00 get you? Here is the list of contents:
The CD has been greatly expanded since I started it. In addition to
the shaper information here is a listing of the contents. The total
contents are now about 400 meg. If you decide to order the CD and
find it useful I would appreciate your spreading the word about it.
Bridgeport Manuals
1981 Programming Manual
1983 Programming Manual
R2E3 Manual
Series II NC Programming Manual
Student Manual
Bridgeport Series 1 Install, Operate and Maintain Manual
Quick Change Tooling for the J Head
Brown and Sharpe
No. 2 Mill Manual
No. 20 Mill Manual
Fundamentals of Machine Tools
Grinding and Lapping
1907 Treatise on Grinding and Lapping
Grinding Dressers
J and S Fluidmotion
Optidress Manual
Selecting the Right Grinding Wheel (Norton)
Tangential Wheel Dresser
Jacobs Chuck
Jacobs Rubber Collet Chuck
Leblond 15 and 19 Inch Lathes
Leblond Manual
Machinery Repair
Odds and Ends
Thread Elements Jones and Lamson
Shaper Work (this is the excellent shaper book that started this)
Shapers - chapter 1 and 2 Machine Tool Operation Vol 2
South Bend
CE 3458 Parts Manual
SB Lathe, Mill, and Shaper Catalog
SB Lathe Accessories Brochure
SB Lubrication Chart
SB Motor Switch Wiring Diagram
SB parts List for 10 to 24 Inch Lathes
SB Parts List No 30B for 9 Inch Lathes
SB Weights A1
SB Weights A
SB Weights B
SB Weights C
SB CE 3758 Parts Manual
SB 1308 14” Variable Speed Lathe Manual
The Advanced Machinist
Tree Mill 2 UVR Manual
Bijur K1 Auto Lube System
Fairbanks Morse Axial Air Gap Motors
Tree Mill 2 UVR Manual
Regards to all,
Errol Groff
Instructor, Machine Tool Department
H.H. Ellis Tech
613 Upper Maple Street
Danielson, CT 06239
860 774 8511 x1811
http://pages.cthome.net/errol.groff/
http://newenglandmodelengineeringsociety.org/
Anouncement - Shaper CD
-
- Posts: 531
- Joined: Sun Dec 22, 2002 9:51 am
- Location: Nottingham, England.
Re: Anouncement - Shaper CD
Got mine today. Sent cash and got it in 10 days.
VERY happy.
Gonna be reading it for quite a while.
Thanks for the tip John.
bc
VERY happy.
Gonna be reading it for quite a while.
Thanks for the tip John.
bc
BC
If there was only one way to do each machining job, the smell of sulphurized cutting oil smoke would have fewer fond memories.
If there was only one way to do each machining job, the smell of sulphurized cutting oil smoke would have fewer fond memories.
Re: Anouncement - Shaper CD
Likewise, I just got mine this weekend. I paid by paypal and got it in just a few days. I, too, will be reading this for some time yet.
I, too, add my thanks. And my recently acquired, and still under repair, Atlas 7B also will appreciate this!
I, too, add my thanks. And my recently acquired, and still under repair, Atlas 7B also will appreciate this!
Re: Anouncement - Shaper CD
I also got a CD. It is really useful as I have a BP and SB Lathes which must be cared for and fed. (I certainly plan on feeding my son's old straight-6 engine block to the BP if he won't move it :>).
I also went to Errol's site http://pages.cthome.net/errol.groff/ and was thoroughly impressed... nothing like that in my HS!!
Thanks again... great CD....
Jerry Robinson
I also went to Errol's site http://pages.cthome.net/errol.groff/ and was thoroughly impressed... nothing like that in my HS!!
Thanks again... great CD....
Jerry Robinson
-
- Posts: 1
- Joined: Thu May 28, 2020 8:43 am
Re: Anouncement - Shaper CD
Is this CD still available?
Re: Anouncement - Shaper CD
John Stevenson passed away a couple of years ago and I'm unsure if his son took over the small parts and information business John had for various items. About all I can suggest is doing a few different searches on U.K. Ebay to see if it's still available.
-
- Posts: 1760
- Joined: Sat Dec 21, 2002 12:16 am
- Location: Green Bay Wisconsin USA
- Contact:
Re: Anouncement - Shaper CD
Yes, and Errol ( a dear friend ) passed away about 3 years ago.
You might try the New England Model Engineering Society to se if someone there can help.
Errol was a member and was secretary I believe .
http://neme-s.org/
Rich
You might try the New England Model Engineering Society to se if someone there can help.
Errol was a member and was secretary I believe .
http://neme-s.org/
Rich