A little humor for the train builders

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: GlennW, Harold_V

Post Reply
toolroom
Posts: 52
Joined: Sat Jan 26, 2013 11:12 am
Location: Portland (area) Oregon

A little humor for the train builders

Post by toolroom »

Greetings, I came across this poem when I was still employed in outside sales. I've had it for years, and thought I'd share this for you builders out here.
dinkin'
Attachments
My Job.pdf
(209.93 KiB) Downloaded 330 times
JackF
Posts: 1617
Joined: Mon Jan 26, 2009 3:56 pm
Location: Caldwell, Idaho

Re: A little humor for the train builders

Post by JackF »

Good one dinkin'. :D

Jack.
toolroom
Posts: 52
Joined: Sat Jan 26, 2013 11:12 am
Location: Portland (area) Oregon

Re: A little humor for the train builders

Post by toolroom »

Thanks Jack, I stumbled upon it, and thought it would meet the steam builders sense of humor.\
dinkin'
rustyh
Posts: 326
Joined: Tue May 01, 2012 1:21 pm
Location: Hornby Island, B.C., Canada

Re: A little humor for the train builders

Post by rustyh »

Cleaning out old e-mails and came across this link, I enjoyed this even if it gave me the creeps..... :lol:

http://player.vimeo.com/video/2578284
User avatar
Flybynight
Posts: 704
Joined: Sun Apr 03, 2005 10:27 pm
Location: Beaver Dam,AZ

Re: A little humor for the train builders

Post by Flybynight »

Ha, liked the wavy tracks.
A couple of years ago, (2010) I was working in Northern Calf.
And the tracks were about that bad along the road going from the motel to the job.
And one morning, about 8-10 cars were laying on their side by a curve.
Armed Men are Citizens, Unarmed men are Subjects.
art.h
Posts: 15
Joined: Sat Jan 19, 2013 9:24 am
Location: peterborough, ontario,ca.

Re: A little humor for the train builders

Post by art.h »

Not much point in turning all the drive wheels to an exact diameter...
Post Reply