Money machine .... very cool !!!

Topics include, Machine Tools & Tooling, Precision Measuring, Materials and their Properties, Electrical discussions related to machine tools, setups, fixtures and jigs and other general discussion related to amateur machining.

Moderators: Harold_V, websterz, GlennW

Post Reply
Jose Rivera
Posts: 3803
Joined: Wed Feb 21, 2007 9:21 pm
Location: Vallejo California

Money machine .... very cool !!!

Post by Jose Rivera » Sat Jul 06, 2013 9:34 pm

There are no problems, only solutions.
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa

928gene928
Posts: 39
Joined: Wed Jul 28, 2010 9:55 am

Re: Money machine .... very cool !!!

Post by 928gene928 » Sun Jul 07, 2013 6:53 am

Jose,
Now that is one slick set of machines. Don't need one but still would like to have.

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: Money machine .... very cool !!!

Post by ken572 » Sun Jul 07, 2013 7:53 am

Good Morning, Jose.

Thank you for sharing this video.

It would sure be nice to have one to play with.. 8)

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.

User avatar
SteveHGraham
Posts: 7788
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Re: Money machine .... very cool !!!

Post by SteveHGraham » Sun Jul 07, 2013 2:13 pm

I remember watching a motorcycle build-off where Indian Larry's shop made twisted parts for either the frame or the forks. I forget. They had some 1"-square steel, and one end of it was held in a vise. The other end was mounted in some sort of twisting tool, sort of like a giant die holder, and several guys were applying torque. Between the guys and the vise there was a man with a torch, heating the metal so it would twist. I was amazed that they could make it come out looking nice, with twists of regular length.

The first machine in this video looks like a much easier solution.
Every hard-fried egg began life sunny-side up.

User avatar
Richard_W
Posts: 1930
Joined: Fri Jan 10, 2003 1:00 am
Location: Molalla, Oregon

Re: Money machine .... very cool !!!

Post by Richard_W » Sun Jul 07, 2013 4:34 pm

These machines are not new, they have been around for some time. Still nice to watch though.


Richard W.

Post Reply