https://www.youtube.com/watch?v=8qGHWZm0C-o
Money machine .... very cool !!!
-
- Posts: 3803
- Joined: Wed Feb 21, 2007 9:21 pm
- Location: Vallejo California
Money machine .... very cool !!!
There are no problems, only solutions.
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa
-
- Posts: 42
- Joined: Wed Jul 28, 2010 9:55 am
Re: Money machine .... very cool !!!
Jose,
Now that is one slick set of machines. Don't need one but still would like to have.
Now that is one slick set of machines. Don't need one but still would like to have.
Re: Money machine .... very cool !!!
Good Morning, Jose.
Thank you for sharing this video.
It would sure be nice to have one to play with..
Ken.
Thank you for sharing this video.
It would sure be nice to have one to play with..
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
- SteveHGraham
- Posts: 7788
- Joined: Sat Jan 17, 2009 7:55 pm
- Location: Florida
Re: Money machine .... very cool !!!
I remember watching a motorcycle build-off where Indian Larry's shop made twisted parts for either the frame or the forks. I forget. They had some 1"-square steel, and one end of it was held in a vise. The other end was mounted in some sort of twisting tool, sort of like a giant die holder, and several guys were applying torque. Between the guys and the vise there was a man with a torch, heating the metal so it would twist. I was amazed that they could make it come out looking nice, with twists of regular length.
The first machine in this video looks like a much easier solution.
The first machine in this video looks like a much easier solution.
Every hard-fried egg began life sunny-side up.
Re: Money machine .... very cool !!!
These machines are not new, they have been around for some time. Still nice to watch though.
Richard W.
Richard W.