Hi Folks. I'm looking for a timing belt with number 300H 075. It measures 30" circumference, 60 tooth (1/2" pitch) and 3/4" wide.
Is that something I might find locally, maybe at an auto parts store?
Timing Belt Cross Reference
Timing Belt Cross Reference
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
- warmstrong1955
- Posts: 3568
- Joined: Thu Mar 18, 2010 2:05 pm
- Location: Northern Nevada
Re: Timing Belt Cross Reference
Gates part number:
http://www.gates.com/all-search-tools/a ... 300H%20075
Enter 'Gates Industrial' in Interchange to, and it'll show up.
Details here:
http://www.gatespowerpro.com/Comergent/ ... N=43402660
The Amazonians have it
http://www.amazonsupply.com/goodyear-en ... B0051UMOM6
You might try your local autoparts store anyway, or bearing/power transmission house. May not have stock, but it's a good Gates number, so maybe they can get it.
Bill
http://www.gates.com/all-search-tools/a ... 300H%20075
Enter 'Gates Industrial' in Interchange to, and it'll show up.
Details here:
http://www.gatespowerpro.com/Comergent/ ... N=43402660
The Amazonians have it
http://www.amazonsupply.com/goodyear-en ... B0051UMOM6
You might try your local autoparts store anyway, or bearing/power transmission house. May not have stock, but it's a good Gates number, so maybe they can get it.
Bill
Today's solutions are tomorrow's problems.
Re: Timing Belt Cross Reference
I have several times bought timing belts from bearing/power transmission houses, as Bill mentioned.
Auto parts places may lean toward automotive timing belts many of which are metric.
Auto parts places may lean toward automotive timing belts many of which are metric.
Re: Timing Belt Cross Reference
Ditto on bearing/transmission houses. ONe here in NJ found the belt for my Maximat for $15, when they-who-shall-not-be-named were asking $60. Not an "off-the-shelf" width -- automotive belts are most of their business, and they tend to be narrower -- but it only took a couple of weeks. (They could have sold me a 3/8" wide one, which I'm sure would work in a pinch, right out of stock; but my belt wasn't broken, I was just doing "belt-and-suspenders" thinking.)
Pete in NJ
Re: Timing Belt Cross Reference
I got mine from Napa a Gates belt around 50 bucks.