Abused Lathe returned to Productive Life

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
rbertalotto
Posts: 71
Joined: Sat Aug 16, 2008 11:38 am
Location: Dartmouth, MA

Re: Abused Lathe returned to Productive Life

Post by rbertalotto »

If I simply unthread the spider, the side panel swings open
Top
smallshop13
Posts: 4
Joined: Tue Jan 20, 2015 8:34 am

Re: Abused Lathe returned to Productive Life

Post by smallshop13 »

I have a Enco just like it that I recently bought and am very happy with.
Attachments
untitled.png
untitled.png (58.41 KiB) Viewed 1221 times
Top
spro
Posts: 8016
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: Abused Lathe returned to Productive Life

Post by spro »

A good lathe is a good lathe. My doggie would be "Chip" I would call out, "CHIPEEERS".... You magnetic wonder dog, time to comb you out. Just rambling, of course. Fine canines here.
Top
Post Reply

Return to “Lathes”