Need help with threading

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
User avatar
mklotz
Posts: 428
Joined: Thu Jan 09, 2003 11:35 am
Location: Los Angeles, CA, USA
Contact:
Contact mklotz

Re: Need help with threading

Post by mklotz »

Almost any 60 deg thread, bastard or not, can be puzzled out with the aid of the diagram and associated formulae shown below...


Image
Regards, Marv

Home Shop Freeware
http://www.myvirtualnetwork.com/mklotz
Top
Post Reply

Return to “Lathes”