Long taper chuck collar thread

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
User avatar
neanderman
Posts: 896
Joined: Mon Jan 09, 2012 7:15 pm
Location: Cincinnati, Ohio, USA

Re: Long taper chuck collar thread

Post by neanderman »

The Le Blond only has the spanner indentations. No holes.

But it's off, it's been taken apart and cleaned, and is ready for some grease and reassembly!

Thanks for all the tips; it's all been very helpful (and educational!)
Ed

LeBlond Dual Drive, 15x30
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels

Proud denizen of the former "Machine Tool Capitol of the World"
Top
Post Reply

Return to “Lathes”