Way wear and lube

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

earlgo
Posts: 1795
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Re: Way wear and lube

Post by earlgo »

One more thing to use Vactra for. The outboard support arm on my horizontal mill was difficult to move until a generous application of way oil occurred. Now it slides as easily as (insert your favorite simile here.)
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
Post Reply