Chuck mounting helper

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: Chuck mounting helper

Post by SteveM »

I've seen homemade versions of this to pick the chuck up:
Image

Just need to get it clamped so that the ring is at the center of gravity.

They even have them for your Kurt vise:
Image

Steve
User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Chuck mounting helper

Post by NP317 »

Chuck mounting helper.
Unknown.jpeg
Unknown.jpeg (13.68 KiB) Viewed 3405 times
~RN
User avatar
Bill Shields
Posts: 10460
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Chuck mounting helper

Post by Bill Shields »

not sure willing to put up with that 'helper'....too much overhead required
Too many things going on to bother listing them.
Post Reply