Random Heavy 10 Parts wanted

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
User avatar
makinsmoke
Posts: 2260
Joined: Thu Jul 10, 2003 12:56 pm
Location: Texas Hill Country

Random Heavy 10 Parts wanted

Post by makinsmoke »

I’ve got a 1940 single tumbler heavy 10.

I’m looking for the screws or studs, or dimensions of the same that hold the one piece end cover on.

Right now there are a couple of pieces of all thread in there about a thread and a half. Obviously the wrong threads. The two aluminum?
knurled nuts that hold the cover on are threaded completely different. Looking at the parts list and photos I can’t even tell what’s right. Help?

Also looking for the small 28 tooth gear. Doesn’t have to be new, just substantially better than what I have now.

And maybe the little angled round stock that keeps the compound locked onto the slide? I have one and the Allen screw. Need the other side.

And maybe an Oiler cup and tube for the apron?

See, random.

Thanks,
Brian
Post Reply