Small Dickson-type quick change toolholder

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
philbert
Posts: 21
Joined: Thu Apr 26, 2018 5:51 am

Small Dickson-type quick change toolholder

Post by philbert »

That's a 10mm boring bar for scale
Attachments
IMG_9901.JPG
pete
Posts: 2518
Joined: Tue Feb 10, 2009 6:04 am

Re: Small Dickson-type quick change toolholder

Post by pete »

Nice job.
philbert
Posts: 21
Joined: Thu Apr 26, 2018 5:51 am

Re: Small Dickson-type quick change toolholder

Post by philbert »

Thanks. Miscut one of the dovetails, which is why it's flattened off. Next time I will cut the profile on a larger piece of steel so I can slice off multiple holders for finishing
Post Reply