Anyone need a chuck?

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: GlennW, Harold_V

Post Reply
earlgo
Posts: 1794
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Anyone need a chuck?

Post by earlgo »

More chucks than anyone will ever need.
chucks at small tools.jpg
Plus the 2 skidloads of Chinese chucks still in boxes. 5" 3 jaw with replaceable top jaws, and some that must have been 8". Plus all kinds of mill and lathe tooling, BIG and medium rotary tables, mill arbors, collets, etc., etc.
Small Tools
26470 Lakeland Blvd
Euclid, OH 44132
Bill Rhea bill@smalltools.com
Sales
1-800-821-2674
Just took a road trip there this afternoon.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
User avatar
mcostello
Posts: 963
Joined: Sat Jan 04, 2003 10:45 pm
Location: Lancaster, Ohio

Re: Anyone need a chuck?

Post by mcostello »

Road trip coming, will have to take the wallet that has the strongest latch.
earlgo
Posts: 1794
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Re: Anyone need a chuck?

Post by earlgo »

Mcostello, don't forget to make a list beforehand or you will forget what you went for.

Since you are making a day of it, you might as well visit :
HGR Industrial Surplus
20001 Euclid Ave
Euclid, OH 44117

Good luck
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
User avatar
mcostello
Posts: 963
Joined: Sat Jan 04, 2003 10:45 pm
Location: Lancaster, Ohio

Re: Anyone need a chuck?

Post by mcostello »

Been to HGR,Wife wised up and goes to the lake, sparing Me. Win,Win.
rrnut-2
Posts: 691
Joined: Mon Jul 18, 2011 7:40 pm
Location: Bennington, NH

Re: Anyone need a chuck?

Post by rrnut-2 »

Not my wife, she can spend hours at HGR and money!

Jim B
User avatar
mcostello
Posts: 963
Joined: Sat Jan 04, 2003 10:45 pm
Location: Lancaster, Ohio

Re: Anyone need a chuck?

Post by mcostello »

Competition in the Home Shop? Not here.
w6br
Posts: 4
Joined: Mon Aug 26, 2013 6:44 pm

Re: Anyone need a chuck?

Post by w6br »

Hi,
Is there a link to his Store??

Thank you,
Ron
User avatar
liveaboard
Posts: 1971
Joined: Sun Dec 08, 2013 1:40 pm
Location: southern Portugal
Contact:

Re: Anyone need a chuck?

Post by liveaboard »

If only I could find a place like that in the EU!
earlgo
Posts: 1794
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Re: Anyone need a chuck?

Post by earlgo »

HGR Industrial Surplus: https://hgrinc.com/

Small Tools: https://www.smalltools.com/

Hope this helps.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
hoppercar
Posts: 616
Joined: Sun Jul 22, 2018 4:09 pm

Re: Anyone need a chuck?

Post by hoppercar »

looking for a 3 jaw chuck with reversible jaws for my 9 inch southbend lathe.....it has a threaded spindle that you just screw the chuck onto
earlgo
Posts: 1794
Joined: Sat Jan 29, 2011 11:38 am
Location: NE Ohio

Re: Anyone need a chuck?

Post by earlgo »

Check the small tools guys in the link above. As mentioned their 3 jaw 5" chucks had removable top jaws. You'd need a threaded back plate.

A note to be cautious about though. The 5" Atlas 3 jaw chuck weighs about 5.5# and the 6" SHAR 3 jaw with replaceable top jaws and back plate weighs 27#. BIG difference in physical handling and load on the spindle end.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
Post Reply