Anyone need a chuck?
Anyone need a chuck?
More chucks than anyone will ever need.
Small Tools
26470 Lakeland Blvd
Euclid, OH 44132
Bill Rhea bill@smalltools.com
Sales
1-800-821-2674
Just took a road trip there this afternoon.
--earlgo
Plus the 2 skidloads of Chinese chucks still in boxes. 5" 3 jaw with replaceable top jaws, and some that must have been 8". Plus all kinds of mill and lathe tooling, BIG and medium rotary tables, mill arbors, collets, etc., etc.Small Tools
26470 Lakeland Blvd
Euclid, OH 44132
Bill Rhea bill@smalltools.com
Sales
1-800-821-2674
Just took a road trip there this afternoon.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
Re: Anyone need a chuck?
Road trip coming, will have to take the wallet that has the strongest latch.
Re: Anyone need a chuck?
Mcostello, don't forget to make a list beforehand or you will forget what you went for.
Since you are making a day of it, you might as well visit :
HGR Industrial Surplus
20001 Euclid Ave
Euclid, OH 44117
Good luck
--earlgo
Since you are making a day of it, you might as well visit :
HGR Industrial Surplus
20001 Euclid Ave
Euclid, OH 44117
Good luck
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
Re: Anyone need a chuck?
Been to HGR,Wife wised up and goes to the lake, sparing Me. Win,Win.
Re: Anyone need a chuck?
Not my wife, she can spend hours at HGR and money!
Jim B
Jim B
Re: Anyone need a chuck?
Competition in the Home Shop? Not here.
Re: Anyone need a chuck?
Hi,
Is there a link to his Store??
Thank you,
Ron
Is there a link to his Store??
Thank you,
Ron
- liveaboard
- Posts: 1981
- Joined: Sun Dec 08, 2013 1:40 pm
- Location: southern Portugal
- Contact:
Re: Anyone need a chuck?
If only I could find a place like that in the EU!
Re: Anyone need a chuck?
HGR Industrial Surplus: https://hgrinc.com/
Small Tools: https://www.smalltools.com/
Hope this helps.
--earlgo
Small Tools: https://www.smalltools.com/
Hope this helps.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.
Re: Anyone need a chuck?
looking for a 3 jaw chuck with reversible jaws for my 9 inch southbend lathe.....it has a threaded spindle that you just screw the chuck onto
Re: Anyone need a chuck?
Check the small tools guys in the link above. As mentioned their 3 jaw 5" chucks had removable top jaws. You'd need a threaded back plate.
A note to be cautious about though. The 5" Atlas 3 jaw chuck weighs about 5.5# and the 6" SHAR 3 jaw with replaceable top jaws and back plate weighs 27#. BIG difference in physical handling and load on the spindle end.
--earlgo
A note to be cautious about though. The 5" Atlas 3 jaw chuck weighs about 5.5# and the 6" SHAR 3 jaw with replaceable top jaws and back plate weighs 27#. BIG difference in physical handling and load on the spindle end.
--earlgo
Before you do anything, you must do something else first. - Washington's principle.