Identifying a south Bend lathe..

All discussion about lathes including but not limited to: South Bend, Hardinge, Logan, Monarch, Clausing and other HSM lathes, including imports

Moderators: Harold_V, GlennW

User avatar
Nelson
Posts: 85
Joined: Wed Nov 14, 2012 10:33 am
Location: New York

Re: Identifying a south Bend lathe..

Post by Nelson » Thu Feb 20, 2014 1:12 pm

Larry,

Try this site. Some pretty knowledgeable people there.
Nels
Founder, Hobby-Machinist.com
SB 10L Lathe in pieces, Burke #4, Van Norman #12

1911ly
Posts: 17
Joined: Tue Jan 07, 2014 2:29 am
Location: South Bend Indiana
Contact:

Re: Identifying a south Bend lathe..

Post by 1911ly » Fri Feb 21, 2014 9:11 pm

Thanks Ken and Nelson!

User avatar
ken572
Posts: 2600
Joined: Sun Mar 14, 2010 8:11 pm
Location: Mesa, Arizona. 85201-1517

Re: Identifying a south Bend lathe..

Post by ken572 » Sat Feb 22, 2014 6:30 pm

1911ly wrote:Thanks Ken and Nelson!
Your Very Welcome. :D

Also, take some time and look at the books,
and info in our Resources Library.

There is a lot of South Bend info in there.

Ken. :)
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.

Post Reply