Hi all,
I'm not sure if it's appropriate to post information about an old lathe to this forum, but I was recently asked to submit some information and pictures of my George Adams round-bed lathe for the lathes.co.uk website and figure that this may be of interest to some folks here. I believe that the lathe is 1902 vintage and I've owned it since 1981. It's used regularly, I don't own any other machine tools other than a drill press, and all of my turning and milling is done on this machine.
http://lathes.co.uk/georgeadamsroundbed/
Best regards
Steve
1902 George Adams Lathe
Re: 1902 George Adams Lathe
Thanks, very interesting lathe.. and very dedicated live steamer to build a loke with just that one machine..
Re: 1902 George Adams Lathe
Hello Steve
Welcome to The Home Machinist!
Thank You for sharing your round bed lathe
with us. It is Very Cool Indeed.
As you have found out, we have members
that really enjoy helping each other, and
sharing there skill’s and or knowledge,as
well as there project’s, idea’s, and more.
In order for this to happen smoothly there
are a few things that are NEEDED:
1)Correct brand names of what ever you
are asking about.
2)Correct Serial numbers, Model No,
Date, and or Country of manufacturer,
Size’s, Colors, Clear Picture’s of the item,
and or it’s data plates, and anything else
you can supply for the members to work
with.
3)Do you already have, or need
Operator and Parts, Manual’s
4) Making sure that you put your
WORLDLY LOCATION in your
PROFILE so it show’s up to the left
of all of your POST’S under your name.
VERY HELPFUL, to member’s trying
to assist you.
5) It is always nice to THANK the members
that spend time HELPING YOU and when
your problem is solved, it’s nice to UPDATE
and share your FIX / REMEDYto help the
next member, to read and learn from.
NOTE: Pictures are alway’s VERY HELPFUL.
Ken.
Welcome to The Home Machinist!
Thank You for sharing your round bed lathe
with us. It is Very Cool Indeed.
As you have found out, we have members
that really enjoy helping each other, and
sharing there skill’s and or knowledge,as
well as there project’s, idea’s, and more.
In order for this to happen smoothly there
are a few things that are NEEDED:
1)Correct brand names of what ever you
are asking about.
2)Correct Serial numbers, Model No,
Date, and or Country of manufacturer,
Size’s, Colors, Clear Picture’s of the item,
and or it’s data plates, and anything else
you can supply for the members to work
with.
3)Do you already have, or need
Operator and Parts, Manual’s
4) Making sure that you put your
WORLDLY LOCATION in your
PROFILE so it show’s up to the left
of all of your POST’S under your name.
VERY HELPFUL, to member’s trying
to assist you.
5) It is always nice to THANK the members
that spend time HELPING YOU and when
your problem is solved, it’s nice to UPDATE
and share your FIX / REMEDYto help the
next member, to read and learn from.
NOTE: Pictures are alway’s VERY HELPFUL.
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
Re: 1902 George Adams Lathe
I went to the link yesterday and it is very good. There were explosions of new ways to machine in very advanced concepts. Lathes as this are rare because they were not "production" machines. During the wars which seem to be the order of things, machines as this were not "engine lathes". They were not "jeweler's lathes and remain by those who knew them. They were either appreciated and put away or met destruction by time and elements. It is rare to see one in use by One who knows to use its functions to the abilities it was designed. Altogether a fascinating post.
-
- Posts: 219
- Joined: Thu May 25, 2006 7:16 am
Re: 1902 George Adams Lathe
Many thanks for your comments, I'm glad that this was of some interest.
I've posted some pictures of the locomotive on the Live Steam page under the heading "A Long Term Project".
Best regards and happy machining to all,
Steve
I've posted some pictures of the locomotive on the Live Steam page under the heading "A Long Term Project".
Best regards and happy machining to all,
Steve
-
- Posts: 112
- Joined: Sat Oct 15, 2011 6:45 pm
Re: 1902 George Adams Lathe
WOW!! What a rare indifferent old lathe!
Talk about "thinking outside the box", he did
Amazing machine, people couldn't replicate that in China!!
Talk about "thinking outside the box", he did
Amazing machine, people couldn't replicate that in China!!