Rockwell Vertical MILL parts

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: Harold_V, GlennW

Post Reply
User avatar
Joe Tanski
Posts: 248
Joined: Wed Nov 02, 2005 5:44 am
Location: Eden ,New York

Rockwell Vertical MILL parts

Post by Joe Tanski » Wed Dec 13, 2017 10:31 am

Looking for a source of old Rockwell Vertical milling machine parts.MY mill is a PM 450-01-651-5001 its about a 1965 mill
I need the Spindle Brake shoe part no 450-01-106-5005
any sources for these parts
Thanks Joe

CarlsShayLoco
Posts: 1
Joined: Sun Feb 11, 2018 6:43 pm
Contact:

Re: Rockwell Vertical MILL parts

Post by CarlsShayLoco » Sun Feb 11, 2018 6:46 pm

I'm pretty sure you can make your own based on a drawing file stored on the Rockwell yahoo users group site.
Carl

User avatar
Joe Tanski
Posts: 248
Joined: Wed Nov 02, 2005 5:44 am
Location: Eden ,New York

Re: Rockwell Vertical MILL parts

Post by Joe Tanski » Sun Feb 11, 2018 8:09 pm

That's what I did,took mill apart,and ground the old pad off and glued on a new picture of brake material working so great
So far.
Joe

Post Reply