Rotex RM-1
Rotex RM-1
Hi all,
I am new to this forum, but have seen in the past some postings for the Rotex RM-1. I JUST bought one yesterday, along with an Atlas 7 shaper. Both machines are in almost unused shape, with the ways still showing new scraping marks, and tight. I've been looking for manuals, parts schematics, and any other documentation for the RM-1. Seems there is little to be found. I saw the website the gent from England has, but haven't heard anything from him yet. I was wondering if someone might have other links to some documentation/manuals I might be able to chase down? Also, if someone has one, any words of wisdom or guidance would be greatly appreciated! Anyway, let me get this out there and watch for any responses. I will be posting more later!
Morgan
I am new to this forum, but have seen in the past some postings for the Rotex RM-1. I JUST bought one yesterday, along with an Atlas 7 shaper. Both machines are in almost unused shape, with the ways still showing new scraping marks, and tight. I've been looking for manuals, parts schematics, and any other documentation for the RM-1. Seems there is little to be found. I saw the website the gent from England has, but haven't heard anything from him yet. I was wondering if someone might have other links to some documentation/manuals I might be able to chase down? Also, if someone has one, any words of wisdom or guidance would be greatly appreciated! Anyway, let me get this out there and watch for any responses. I will be posting more later!
Morgan
Re: Rotex RM-1
For shaper information both on your Atlas and more generic types try Googleing Kay Fishers Metal Shaper Columns. Lot's of Youtube videos about shaper operation as well.Various other search terms can bring up even more.
-
- Posts: 2366
- Joined: Tue Jan 20, 2009 9:33 pm
- Location: Phoenix ,AZ
Re: Rotex RM-1
A picture or 2 of the Rotex would be a help . personally never heard of that brand.
www.chaski.com
Re: Rotex RM-1
I'll try to get a couple pics of it and post them. From what I've found out, it's a company out of Cali in the bay area, but they don't make mills any longer, just punches. It's not a large machine by any means (about 450lbs) but a nice addition for doing lighter work and experimenting with.
Thanks for the quick relies guys! I'll look up Kay Fishers Metal Shaper and see what I get for the Atlas.
Thanks for the quick relies guys! I'll look up Kay Fishers Metal Shaper and see what I get for the Atlas.
Re: Rotex RM-1
You can get info and pictures of Rotex mills here:
http://www.lathes.co.uk/rotex/
Is yours vertical or horizontal?
Steve
http://www.lathes.co.uk/rotex/
Is yours vertical or horizontal?
Steve
Re: Rotex RM-1
Hi All,
I know this thread is a few months old but since Rotex threads are rare I wanted to contribute.
A question was posed above about Rotex images.
I see the UK site (above) has added a few images since the last time I looked.
Here are a couple of snapshots of mine. It is an RM-1 Horizontal with a Rusnok 70 vertical head mounted in place of the overarm (which I have).
I know this thread is a few months old but since Rotex threads are rare I wanted to contribute.
A question was posed above about Rotex images.
I see the UK site (above) has added a few images since the last time I looked.
Here are a couple of snapshots of mine. It is an RM-1 Horizontal with a Rusnok 70 vertical head mounted in place of the overarm (which I have).
Re: Rotex RM-1
Hello. Aren't you the lucky devil.
It' a very nice machine. Beautiful condition too.
I looked at/considered these a few years back,
but decided to go a bit bigger. Basically a bit of a
spin-off the Benchmasters that were made in So-Cal. area
a bit earlier on. I hope you enjoy it.
It' a very nice machine. Beautiful condition too.
I looked at/considered these a few years back,
but decided to go a bit bigger. Basically a bit of a
spin-off the Benchmasters that were made in So-Cal. area
a bit earlier on. I hope you enjoy it.
Re: Rotex RM-1
Very neat machine. The pix are better when expanded (ctrl +) to see the details. It appears to be a precision type of mill. That is easy to say, not a Hardinge but there are elements which took some time to include. The table looks substantial and I think I'm seeing an unusual version of T-slots. That is, round slots. This isn't unheard of, as special grinding and fixtures were made that way. I don't even know how or why but there is a reason.
Re: Rotex RM-1
Hi Spro,
Sorry about the T-Slot camouflage in my images. The slots are "T"s although their dimensions are just far enough off that I make my own nuts rather than buy the slot, bolt and clamp kits. They are sized in between 5/16 and 3/8 nuts with 3/8 thread. The "camo" is some plastic tubing from the junk box I had crammed in the slots to keep chips out. It did not work as well as hoped. They have since been removed and another item from the bin (a piece of Lexan) has been cut as a slot cover surrounding the Palmgren vice. I'd like to figure out some way covers, but the method has eluded me so far. Too much stuff in the way.
Wally, I do consider myself lucky. This thing fell into my lap about 10 years ago from a workmate. It has not needed that much TLC until a recent replacement of the X-axis power feed gear. I bought a Boston that was pretty close and did a little machining with the <gasp> Atlas lathe to fit it.
Sorry about the T-Slot camouflage in my images. The slots are "T"s although their dimensions are just far enough off that I make my own nuts rather than buy the slot, bolt and clamp kits. They are sized in between 5/16 and 3/8 nuts with 3/8 thread. The "camo" is some plastic tubing from the junk box I had crammed in the slots to keep chips out. It did not work as well as hoped. They have since been removed and another item from the bin (a piece of Lexan) has been cut as a slot cover surrounding the Palmgren vice. I'd like to figure out some way covers, but the method has eluded me so far. Too much stuff in the way.
Wally, I do consider myself lucky. This thing fell into my lap about 10 years ago from a workmate. It has not needed that much TLC until a recent replacement of the X-axis power feed gear. I bought a Boston that was pretty close and did a little machining with the <gasp> Atlas lathe to fit it.