Kurt 3" vise handles

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: GlennW, Harold_V

Post Reply
JohnHudak
Posts: 1140
Joined: Sat Jan 04, 2003 2:18 pm
Location: Ohio

Kurt 3" vise handles

Post by JohnHudak »

Hi All, I somehow ended up buying two 3" Kurt D30's, but neither one has the vise handle.. I know this is a long shot, but does anyone have one laying around that they'd like to get rid of?
Thanks; John
Profkanz
Posts: 6
Joined: Mon Dec 04, 2017 9:14 am

Re: Kurt 3" vise handles

Post by Profkanz »

Should have a hex that you can measure. Then use a socket and battery impact driver. Not OEM I know but way faster than original handle. Then a socket with a breaker bar or ratchet for final clamping and release.
JohnHudak
Posts: 1140
Joined: Sat Jan 04, 2003 2:18 pm
Location: Ohio

Re: Kurt 3" vise handles

Post by JohnHudak »

Thanks, that's what I'm using now...
They are 7/16" hex BTW
Post Reply