Downwindtracker2 got me to looking at THE site ; UK Lathes. There is a mill with cast BUSY BEE on it's ram. It is made in Italy and you have to see it.
It works similar to a Van Norman but is like Ferrari engineers got there. There are two pages of pictures of this milling machine. Astounding in many ways. It has many features not present with older designs. If we look closer, there is a cavity which acts as boring bar. The main spindles are #40 taper but there is much more to this machine than can be described.
BUSY BEE MILLING MACHINE
Re: BUSY BEE MILLING MACHINE
http:lathes.co.uk/busybee/
Re: BUSY BEE MILLING MACHINE
Interesting and fairly usual European Deckel, Abene etc type layout for a horizontal / vertical machine by the looks of it. I'd kick my Taiwan BP clone to the curb for something like that. Not a name I would have accociated with anything built in Italy though.
Re: BUSY BEE MILLING MACHINE
Yes. That is what strikes me as the casting built towards English speaking countries. Occupatus Apis or something, maybe not as friendly sounding.
Re: BUSY BEE MILLING MACHINE
Maybe it sounds a lot better in Italian?
-
- Posts: 276
- Joined: Wed Feb 13, 2008 9:34 pm
- Location: B.C.
Re: BUSY BEE MILLING MACHINE
Certainly not our local BusyBee, brother to Grizzly tools. A great resource that site .
A man of foolish pursuits, '91 BusyBee DF1224g lathe,'01 Advance RF-45 mill/drill,'68 Delta Toolmaker surface grinder,Miller250 mig,'83 8" Baldor grinder, plus sawdustmakers
Re: BUSY BEE MILLING MACHINE
Astounding site and existed a long time. This isn't total freebie. They need support. Imagine if that site crashed into oblivion. All that knowledge and records. Well don't imagine that. Fund that site as this one. They don't "ask" much for what we get. Dang I need to get with it. My security wouldn't allow a transfer via paypal. One way or another, it will be done.
Right. Then it doesn't. I cannot believe this. If it is still working, why touch it? Well it is better to support as like a lubricant before something Seizes Up.
Right. Then it doesn't. I cannot believe this. If it is still working, why touch it? Well it is better to support as like a lubricant before something Seizes Up.
Re: BUSY BEE MILLING MACHINE
I've spent a lot of time on Tony website and agree it's a great resource. However he uses that site to list and sell quite expensive photocopys of machine manuals. I doubt he needs the little I could give.
Re: BUSY BEE MILLING MACHINE
No denying a good point.