aftermarket rockwell 21-100 power feed advice

Discussion on all milling machines vertical & horizontal, including but not limited to Bridgeports, Hardinge, South Bend, Clausing, Van Norman, including imports.

Moderators: Harold_V, GlennW

Post Reply
caseguy
Posts: 19
Joined: Tue Apr 13, 2010 7:12 pm
Location: Burnt Hill, NY

aftermarket rockwell 21-100 power feed advice

Post by caseguy » Sat May 05, 2018 3:04 pm

i got a new mill to me and i want advice on after market x power feed. Has anyone installed one and could give me good advice on where to go to get a good one. seems like everyone sells them but i have no clue on the power range i should get 135, 150 ect. need some help please. Mike

John Evans
Posts: 1939
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: aftermarket rockwell 21-100 power feed advice

Post by John Evans » Sat May 05, 2018 3:10 pm

Having no idea what one of those looks like .I went googling and found some pictures. The commonly available power feeds are designed for Bridgeports and clones .From the 21-100 pictures no way those will work without a bunch of fab and re-engineering .
www.chaski.com

Post Reply