The Home Machinist!

Thanks for the info guys. It looks like the mill only has one brass wedge on the back, but it seems to only be contacting on a small area, so I may try to re-shape it a little to get some more contact area.

On a side note, a pressure washer makes short work of less than stellar paint. The mill also has some sort of factory oiling system, but I don't think it works, as some pieces are broken. Hopefully, I can get or make replacements to get it working like originally designed again.

Thanks! I was needing one and order it today. That was a much better price than I have seen. Now if it will just fit an Anayak mill?

Richard W.

Kazix

Cangrats on your new to you mill.
I also have a Induma mill. A 9X42 Vari speed head. Yours appears to be the 1/S model. yours has some minor differances from what Ive seen. The opening on the front of the table in the centre, Ive only seen once before. What yr is your mill built? , or what serial # is it?

Paul

No idea on the year. I was going to ask what the cavity on the front is for....as I have no idea. It has a hole about the size of a quarter in the back of the casting, so I don't think it's supposed to hold anything. There is also what looks to be some sort of sensor that goes through the casting into the cavity on the top. I can get the serial number when I get home.