Hi new to the forum
I hope someone can help me here, I am looking for a set of electrical drawings for a Tree Journeyman 320
If you have any other manuals I'll be more than grateful for a copy
If I can be of any assistance to anybody else, I have been working in the CNC repair for the last 30 years and have some knowledge.
I'll be more than happy to answer any questions.
Thank you
Tree Journeyman 320
Re: Tree Journeyman 320
Hello 
Emtech1 
Welcome to The Home Machinist!
As you have found out, we have members
that really enjoy helping each other, and
sharing there skill’s and or knowledge,as
well as there project’s, idea’s, and more.
In order for this to happen smoothly there
are a few things that are NEEDED:
1)Correct brand names of what ever you
are asking about.
2)Correct Serial numbers, Model numbers,
Date, and or Country of manufacturer,
Size’s, Colors, Clear Picture’s of the item,
and or it’s data plates, and anything else
you can supply for the members to work
with.
3)Do you already have,
Operator and Parts, Manual’s
4) Making sure that you put your
WORLDLY LOCATION in your
PROFILE so it show’s up to the left
of all of your POST’S under your name.
VERY HELPFUL, to member’s trying
to assist you.
With that said it would be very helpful to
have one of these, because each of their
Machines has custom wiring diagram's.
Ken.
Emtech1 Welcome to The Home Machinist!
As you have found out, we have members
that really enjoy helping each other, and
sharing there skill’s and or knowledge,as
well as there project’s, idea’s, and more.
In order for this to happen smoothly there
are a few things that are NEEDED:
1)Correct brand names of what ever you
are asking about.
2)Correct Serial numbers, Model numbers,
Date, and or Country of manufacturer,
Size’s, Colors, Clear Picture’s of the item,
and or it’s data plates, and anything else
you can supply for the members to work
with.
3)Do you already have,
Operator and Parts, Manual’s
4) Making sure that you put your
WORLDLY LOCATION in your
PROFILE so it show’s up to the left
of all of your POST’S under your name.
VERY HELPFUL, to member’s trying
to assist you.
With that said it would be very helpful to
have one of these, because each of their
Machines has custom wiring diagram's.
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
-
fahrphrompuken
- Posts: 5
- Joined: Thu Nov 21, 2013 8:28 am
- Location: S.W. Michigan
Re: Tree Journeyman 320
Hi, I just discovered your post. Not sure if you still need this or not, but I do have a pdf of the J320 drawings, up to page 21. I am looking for at least page 33, that has the speed control setup info. Would really like to find the entire set, although I don't know how many total pages there are.
I recently restored a J320 that had a delta 10 upgrade already. I upgraded it to a delta 50, and have everything working except for the speed control.
Bill
I recently restored a J320 that had a delta 10 upgrade already. I upgraded it to a delta 50, and have everything working except for the speed control.
Bill