Online Calculator for setting a Sine Plate or Sine Bar

This is where bits of wisdom will be stored, a frequently asked question section with answers.

Moderator: Harold_V

Post Reply
Don Bailey
Posts: 86
Joined: Fri Dec 19, 2014 4:23 pm
Location: Auburn Hills, Mi.

Online Calculator for setting a Sine Plate or Sine Bar

Post by Don Bailey »

www.subtool.com
We have a free tool on our website that will give you the proper gage block stack by simply inputting your angle or angles and roll center distance in the online calculator. This will work for Sine Bars , Simple Sine Plates and compound Sine Plates.
Go to the Help- Repair Parts - Video section on our website and select simple Sine Plate or Compound Sine Plate and follow the instructions.
I have attached a video that explains how it works.

https://www.youtube.com/watch?v=VBAdZwM4Ei8
Post Reply