EMD F7 in SCALE
Moderator: Harold_V
-
- Posts: 204
- Joined: Wed Jul 12, 2006 9:22 pm
- Location: British Columbia, Canada
Re: EMD F7 in SCALE
I wish you a complete and speedy recovery BDD.
AP
AP
- Benjamin Maggi
- Posts: 1409
- Joined: Wed Apr 25, 2007 10:38 pm
- Location: Albany, NY
Re: EMD F7 in SCALE
The nose contour looks really well done. Nice job!
"One cannot learn to swim without getting his feet wet." - Benjamin Maggi
- Building: 7.25" gauge "Sweet Pea" named "Catherine"
- Building: 7.25" gauge "Sweet Pea" named "Catherine"
-
- Posts: 204
- Joined: Wed Jul 12, 2006 9:22 pm
- Location: British Columbia, Canada
Re: EMD F7 in SCALE
Hello BDD,
I would love to hear more about the build of your F unit if/when you feel up to it.
AP
I would love to hear more about the build of your F unit if/when you feel up to it.
AP
Re: EMD F7 in SCALE
The eye surgery I had last December was not a success and I no longer have visual acuity in my left eye. I will eventually get back to adding to this topic, but being one-eyed Jack has slowed me down a bit. The priority is to get this locomotive detailed, painted and out of the shop.Andrew Pugh wrote:I would love to hear more about the build of your F unit if/when you feel up to it.
Meanwhile here are pics of the front of the unit after I did a test installation of some grab irons.
———————————————————————————————————————————————————————
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Re: EMD F7 in SCALE
Looking good Bill!
I'll get you those steps when i get back
-Dave
I'll get you those steps when i get back
-Dave
Re: EMD F7 in SCALE
Roger that.fly5150 wrote:Looking good Bill!
I'll get you those steps when i get back
-Dave
Test-fitted the new grilles and they look good. I'll have the old ones boxed and shipped to you in a few days.
Thanks.
———————————————————————————————————————————————————————
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Re: EMD F7 in SCALE
Looking great! Keep up the good work.
Jim B
Jim B
Re: EMD F7 in SCALE
Thanks!rrnut-2 wrote:Looking great! Keep up the good work.
Jim B
———————————————————————————————————————————————————————
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
-
- Posts: 2930
- Joined: Mon Nov 10, 2014 1:39 pm
- Location: Woodinville, Washington
Re: EMD F7 in SCALE
Would love to know how you built the nose with all the contours ! Great job and superb write up!
Glenn B.
Glenn B.
Moderator - Grand Scale Forum
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge
Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....
Re: EMD F7 in SCALE
That is my nose casting that he is using.Glenn Brooks wrote:Would love to know how you built the nose with all the contours ! Great job and superb write up!
Glenn B.
See my website below.
Re: EMD F7 in SCALE
As Dave noted above, he can supply the nose castings.Glenn Brooks wrote:Would love to know how you built the nose with all the contours!
The nose casting is made from Alumilite, a material that was originally developed for the aircraft industry to facilitate the production of lightweight complex shapes, such as wing tips and wing root fairings, items that previously had to be stamped from aluminum using costly tooling. Alumilite is a two-part resin compound with powdered aluminum dispersed throughout it to give it a remarkable strength-to-weight ratio. It can be machined, drilled and tapped, epoxied and with proper prep, painted to a high gloss finish.
An Alumilite part is made by preparing a silicone rubber mold, mixing the resin with a catalyst and then pouring the mixture into the mold. Depending on which product is used, pot life can be relatively short and the finished part can usually be extracted from the mold in under five minutes. Alumilite is highly exothermic while curing, which means only a limited number of parts can be produced before the mold deteriorates to an unusable state.
As received, the nose casting required relatively little cosmetic work. Most of the cosmetic stuff was in blending the joint between the nose casting and the main part of the steel body, in which I used PC-7 epoxy, arguably the strongest thixotropic epoxy on the market.
The door headlight opening is a modification that Dave devised. Using a jig and hole saw, a large hole is bored through the casting and a short piece of machined PVC pipe is fitted. After prepping the parts with abrasive cloth and acetone, I attached the PVC pipe to the nose with PC-7, using a specially ground putty knife to shape the epoxy into a nice radius.
PC-7, like all epoxies, cures faster when heated and since it is a thixotropic compound, heat aids in shaping it. I use an ordinary heat lamp for the purpose. Once fully cured, some sanding was all it took to get it presentable.
Thanks! Sometimes I fool humans with my smarts routine.Great job and superb write up!
———————————————————————————————————————————————————————
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
Music isn’t at all difficult. All you gotta do is play the right notes at the right time!
- makinsmoke
- Posts: 2265
- Joined: Thu Jul 10, 2003 12:56 pm
- Location: Texas Hill Country
Re: EMD F7 in SCALE
Looking for that website link, Glenn!