J3b Hudson

Where users can chronicle their builds. Start one thread and continue to add on to it.

Moderators: Harold_V, WJH, hwboivin3

Post Reply
Greg temp
Posts: 23
Joined: Fri Aug 25, 2017 9:16 am

J3b Hudson

Post by Greg temp » Sat Aug 26, 2017 2:44 am

Hi everyone,I have been biulding a J3b Hudson in 7 1/4 inch scale,I have been working from ,dxf files,as you will know scaling from such drawings can be difficult due to scaled parts becoming too small to be practical,so in reality it's a freelance hudson
Anyway here are some pics of the progress so far,[]
Attachments
IMG_20150502_105552.jpg
IMG_20151112_185225.JPG
IMG_20150502_105540.jpg
It's better to try and fail than not to try at all,

User avatar
Sandiapaul
Posts: 319
Joined: Wed Jan 07, 2004 8:04 am
Location: Princeton, NJ

Re: J3b Hudson

Post by Sandiapaul » Thu Aug 31, 2017 5:18 am

Looks good so far! Where are you located?

Greg temp
Posts: 23
Joined: Fri Aug 25, 2017 9:16 am

Re: J3b Hudson

Post by Greg temp » Thu Aug 31, 2017 5:13 pm

I'm in New Zealand,as far as I know I'll have the only one in the country,,the boiler is now complete,and foot plate fitted,will post some more pic's shortly
It's better to try and fail than not to try at all,

Post Reply