my project

Where users can chronicle their builds. Start one thread and continue to add on to it.

Moderator: Harold_V

Post Reply
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

my project

Post by Hudson Honey »

As I stated in that little engines thread...I am constructing the "hudson" version of LE's "old northern". Would love to post some photos .......can I get a heads up on how to do that on this site. Seems each blog site has it's own methods.

Huggles, Pamela
Bruce_Mowbray
Posts: 705
Joined: Sat Jan 04, 2003 7:45 pm
Location: Pennsylvania

Re: my project

Post by Bruce_Mowbray »

Pam,

Once you are logged in, just scroll down under the reply window (where you type your reply) and you will see "Upload Attachment". Click browse. Just browse to your picture file and double click on it. This will enter the file name. Then click the "add the file" button and your picture will attach to your reply. Keep in mind to keep the picture file size below the required maximum.
Bruce Mowbray
Springville & Southern RR
TMB Manufacturing & Locomotive Works
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

Re: my project

Post by Hudson Honey »

Thankyou very much
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

Re: my project

Post by Hudson Honey »

let's give this a try
Attachments
DSC_0314.JPG
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

Re: my project

Post by Hudson Honey »

lead truck is finished now
Attachments
DSC_0354.JPG
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

Re: my project

Post by Hudson Honey »

some details of the lead truck before paint
Attachments
DSC_0279.JPG
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

Re: my project

Post by Hudson Honey »

frame details
Attachments
DSC_0296.JPG
DSC_0317.JPG
User avatar
Highiron
Posts: 790
Joined: Thu Jan 09, 2003 7:04 pm
Location: Lancaster, PA

Re: my project

Post by Highiron »

Pam

Very nice work!!...nice to see pictures of your project...glad I was able to help you

Mike
Andypullen
Posts: 2165
Joined: Thu May 22, 2003 8:17 am
Location: Bel Air, MD

Re: my project

Post by Andypullen »

Looking good, Pam!

Andy Pullen
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

Re: my project

Post by Hudson Honey »

Thankyou both.....just taking my time and being careful
Bruce_Mowbray
Posts: 705
Joined: Sat Jan 04, 2003 7:45 pm
Location: Pennsylvania

Re: my project

Post by Bruce_Mowbray »

Very nice work. I especially like the pedestal jaw toe joint for the binders. Very prototypical. Can I ask what the pile of frames are for on the back of your workbench ??
Bruce Mowbray
Springville & Southern RR
TMB Manufacturing & Locomotive Works
Hudson Honey
Posts: 1124
Joined: Sat Nov 13, 2010 7:56 am
Location: San Diego area

Re: my project

Post by Hudson Honey »

Those are extra frame rails.....I aquired left over material from work(they were never going to use it again) had the waterjet set up to cut frames so just cut some extras in case I screwed something up. Always learned "when you have extras available you'll never mess up" has always worked for me.... :D


Pamela
Post Reply