Just in case anyone missed it, I'm reposting this from the TM thread.....
Ken
Erie K5a Pacific
Moderator: Harold_V
Re: Erie K5a Pacific
Brian, Awsome Job on your Pacific, Being able to build in short order, and run for days, track on rough track, and maintain traction is a testement of your machinist skills, and Little Engines designs! It was a blast running my 0-4-0 around you at Neols Saturday and to watch 20+ cars being pulled up the grades. Congrats!
C&O EMD F7A 24vdc Locomotive(Museum Trains)
Chessie diesel switcher(5hp Free lance design) 0-4-0
Pine Grove Vineyards Davenport (Ride-Trains)Switcher 0-4-0
Wolf Run and Tambine Clishay 0-4-4-0(Bob Maynard design)
Mack Loco
http://www.neols.net (NorthEastern Ohio Live Steamers)
hondavt@windstream.net
Chessie diesel switcher(5hp Free lance design) 0-4-0
Pine Grove Vineyards Davenport (Ride-Trains)Switcher 0-4-0
Wolf Run and Tambine Clishay 0-4-4-0(Bob Maynard design)
Mack Loco
http://www.neols.net (NorthEastern Ohio Live Steamers)
hondavt@windstream.net
-
- Posts: 134
- Joined: Mon Mar 08, 2010 6:25 am
- Location: Austintown Ohio
Re: Erie K5a Pacific
Well the running season is done for the 2938. It has been a very fun summer of running the engine with next to no issues. So far the engine has been to Train Mountain, Northeastern Ohio Live Steamers, Mill Creek Central, PA&W, and the Canton St Paul and Pacific. The engine has way exceeded my expectations. I never thought it would perform this good with no modifications. Now it is time to start working on the engine again and I will try to keep the thread updated with my progress. Here is a video from Sunday at the Mill Creek Central. Again a huge thank you to Brian Keim, if it was not for him helping me build the engine and letting me use his shop I would never have been able to build the locomotive, Mike Venezia for selling great castings and advice, Andy Pullen for work on the cylinders and drive wheels, and Marty Knox for making an awesome boiler!
Brian
Brian
Re: Erie K5a Pacific
Now, that is one sweet sounding locomotive.
Donald
Donald
-
- Posts: 2165
- Joined: Thu May 22, 2003 8:17 am
- Location: Bel Air, MD
Re: Erie K5a Pacific
Thank you for the kind words!
A
A
Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.