Page 2 of 2

Re: 15" new build question

Posted: Fri Nov 25, 2016 2:19 am
by LIALLEGHENY
Rob, I can turn 22" diameter over the bed on one lathe, and up to 27" in the gap on another. I need 19+ for the 69" drivers in 3.2" scale. Yes I would be interested in the Hudson castings/part. PM me with any info you might have.

Jim, Checked out your facebook page and put in a request to join. Great page! I'll definitely be getting in touch with Jim Killen for the drawings. I was going to get in touch with you about your drawings and what you have for other NKP drawings regarding the Berk build. I would like to build my model as close to the prototype as possible.

Nyle