Hi All
As you all know I am progressing with the 0-4-0 project. There has been enough sales to warrant me making the remainder of the casting set.
I will be offering all the casting that I sold back in the old Mercer days pre 1990.
One of the things I offered was the spring set.
I have the leaf springs covered but I'm in need of help with the coil springs
So I'm asking the question to all the Mercer Camelback owners. Would any of you be able to tell me what size the coil springs are?
I lost my info on them. I know that there are two different sizes. The front two under the leaf spring are heaver then the eight rear springs
I know the diameter is 1/2 inch for both types but I need to know the length and wire sizes.
Thanks Dave
IN NEED OF HELP
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
IN NEED OF HELP
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
-
- Posts: 46
- Joined: Sat Oct 13, 2018 4:55 am
Re: IN NEED OF HELP
Dave,
Did you ever get the info you needed.? I'm not sure ours counts but I could check for you.
Did you ever get the info you needed.? I'm not sure ours counts but I could check for you.