Check valves in 3/4"
Check valves in 3/4"
Does any one have or know of a print for 3/4" check valve's ? I have not found any on line or in any of the book's that I can make myself.Any help would be great.I am building a 4-8-4 in 3/4" scale from Little Engine casting's I got in 1982, after my great uncle Gordon Gorwin.
stay on the shine side of the rail
- Bill Shields
- Posts: 10605
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: Check valves in 3/4"
Send me an e-mail and I can send you something back. I have made a few dozen over the years..but in reality have found it is easier to just purchase them.
What size fittings are you using - 1/4-40 model taper pipe?
Straight or 90 degree?
bshields at mehrs dot com.
What size fittings are you using - 1/4-40 model taper pipe?
Straight or 90 degree?
bshields at mehrs dot com.
Too many things going on to bother listing them.