Allen Models 0-4-0 print #12 plan change

[Steve Alley]

To all out there that has bought the drawings set for the 0-4-0. I have just been inform that there was a mistake in the Cylinder drain set. It shows a measurement of .281 on the drawing for the valve chest from edge side to first hole in the 5 hole group of holes. The is incorrect and the true new measurement should be .1562 from edge. Please make changes to your drawings. If questions call me at 775 782-3800 have your print open from me to explain what to do for change. Or e-mail me at www.jetalley@aol.com

I have a new drawing for this now and so this has been corrected with new prints. This is a simple change to do on your drawings. I will not send out new replacements for free.
Thank You

Steve Alley