Injector Starter Valves & Fittings UPDATE

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

Post Reply
User avatar
AnthonyDuarte
Posts: 491
Joined: Tue Jan 19, 2010 10:46 am
Location: Orange, CA
Contact:

Injector Starter Valves & Fittings UPDATE

Post by AnthonyDuarte »

Hi everyone,

Good news this time! Castings for the Nathan "Type 1921" injector starter valves in 1.6" have arrived, and they look great.
I've been working intermittently on some of the machined components for the starter valves, and I'll work on them full bore after injectors are delivered.
Nathan 1921 Casting.jpg
Fittings arrived in the same shipment, and they will be available on my website (http://www.eccentricengineer.com). Still need to do a little cleanup and figure out pricing. I will let you all know as soon as they are listed.
I'm planning on bringing some fittings to the Bitter Creek Narrow Gauge Meet this weekend, so if you are in need of some come find me!

With this shipment I'll have the following available in 3/16", 1/4" and 5/16"
• 90º Elbows
• 45º Elbows
• 180º Elbows
• 90º Street Elbows
• 45º Street Elbows
• Tees
• 4-way Tees
• Couplings
EE Fittings.jpg
Despite the hiccups, there has been good progress on the Standard Injectors as well. I anticipate delivering the second batch before the end of this month.

Hope to see you this weekend at BCW,
- Anthony
FLtenwheeler
Posts: 1594
Joined: Sun Jan 05, 2003 8:47 am
Location: Florida, on the Lake Wales Ridge

Re: Injector Starter Valves & Fittings UPDATE

Post by FLtenwheeler »

Thanks for keeping us updated.

Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
User avatar
AnthonyDuarte
Posts: 491
Joined: Tue Jan 19, 2010 10:46 am
Location: Orange, CA
Contact:

Re: Injector Starter Valves & Fittings UPDATE

Post by AnthonyDuarte »

Hi everyone,

Fittings are available to purchased online!
More info in the "marketplace" forum.

- Anthony Duarte
www.eccentricengineer.com
Post Reply