Injector Starter Valves & Fittings UPDATE
Posted: Thu Aug 10, 2017 1:55 am
Hi everyone,
Good news this time! Castings for the Nathan "Type 1921" injector starter valves in 1.6" have arrived, and they look great.
I've been working intermittently on some of the machined components for the starter valves, and I'll work on them full bore after injectors are delivered.
Fittings arrived in the same shipment, and they will be available on my website (http://www.eccentricengineer.com). Still need to do a little cleanup and figure out pricing. I will let you all know as soon as they are listed.
I'm planning on bringing some fittings to the Bitter Creek Narrow Gauge Meet this weekend, so if you are in need of some come find me!
With this shipment I'll have the following available in 3/16", 1/4" and 5/16"
• 90º Elbows
• 45º Elbows
• 180º Elbows
• 90º Street Elbows
• 45º Street Elbows
• Tees
• 4-way Tees
• Couplings
Despite the hiccups, there has been good progress on the Standard Injectors as well. I anticipate delivering the second batch before the end of this month.
Hope to see you this weekend at BCW,
- Anthony
Good news this time! Castings for the Nathan "Type 1921" injector starter valves in 1.6" have arrived, and they look great.
I've been working intermittently on some of the machined components for the starter valves, and I'll work on them full bore after injectors are delivered.
I'm planning on bringing some fittings to the Bitter Creek Narrow Gauge Meet this weekend, so if you are in need of some come find me!
With this shipment I'll have the following available in 3/16", 1/4" and 5/16"
• 90º Elbows
• 45º Elbows
• 180º Elbows
• 90º Street Elbows
• 45º Street Elbows
• Tees
• 4-way Tees
• Couplings
Hope to see you this weekend at BCW,
- Anthony