3/4" OD copper K type tube Roller

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

User avatar
Greg_Lewis
Posts: 1463
Joined: Wed Jan 15, 2003 2:44 pm
Location: Fresno, CA

Re: 3/4" OD copper K type tube Roller

Post by Greg_Lewis » Thu Sep 28, 2017 10:53 am

I think you have to decide how many boilers you plan to build. For those of us who only build one or two boilers, a shop-built roller will work just fine. I wrote up a design by John Bailie which was published in Live Steam. I made one and it worked great. I'll send along the plans to anyone who p.m.s me with an email address.
Greg Lewis, Prop.
Eyeball Engineering — Home of non-interchangeable parts.
Our motto: "That looks about right."
Celebrating 30 years of turning perfectly good metal into bits of useless scrap.

duckman903
Posts: 298
Joined: Fri May 28, 2010 3:40 pm
Location: Winchendon Mass. USA

Re: 3/4" OD copper K type tube Roller

Post by duckman903 » Wed Oct 04, 2017 5:16 pm

I would like a set of plans my e-mail is
tmccune4@gmail.com

Post Reply