1/32" Round Head Rivets

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, WJH, cbrew

Post Reply
User avatar
FLtenwheeler
Posts: 1255
Joined: Sun Jan 05, 2003 8:47 am
Location: Florida, on the Lake Wales Ridge

1/32" Round Head Rivets

Post by FLtenwheeler » Thu Sep 28, 2017 9:21 am

Hi All

Is there anyplace in the states that stocks 1/32" rivets?

Thanks
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.

jcbrock
Posts: 300
Joined: Tue May 22, 2012 7:50 pm
Location: Oregon

Re: 1/32" Round Head Rivets

Post by jcbrock » Thu Sep 28, 2017 10:17 am

Once you get that small, if they are cosmetic only, escutcheon pins from someplace like Jamestown Distributors might be a solution.
John Brock

User avatar
Fender
Posts: 2512
Joined: Wed May 02, 2007 8:33 pm
Location: Chattanooga TN

Re: 1/32" Round Head Rivets

Post by Fender » Thu Sep 28, 2017 1:15 pm

A #20 escutcheon pin is 0.035" diameter, pretty close to 1/32".
Dan Watson

User avatar
Sandiapaul
Posts: 320
Joined: Wed Jan 07, 2004 8:04 am
Location: Princeton, NJ

Re: 1/32" Round Head Rivets

Post by Sandiapaul » Sat Sep 30, 2017 6:39 am

Try here:
http://sapphireproducts.co.uk/641t1.htm

I bought some from them a while back

AMc
Posts: 22
Joined: Thu May 15, 2014 4:11 pm
Location: VIRGINIA

Re: 1/32" Round Head Rivets

Post by AMc » Mon Oct 02, 2017 7:40 pm

This outfit is a abvertisersis in Model Engineering Magazine.
http://sapphireproducts.co.uk/641t1.htm

1/32 to 2in in dia...
Last edited by Harold_V on Tue Oct 03, 2017 12:08 am, edited 1 time in total.
Reason: to correct link which was not functional

Post Reply