Page 1 of 1
1/32" Round Head Rivets
Posted: Thu Sep 28, 2017 9:21 am
by FLtenwheeler
Hi All
Is there anyplace in the states that stocks 1/32" rivets?
Thanks
Tim
Re: 1/32" Round Head Rivets
Posted: Thu Sep 28, 2017 10:17 am
by jcbrock
Once you get that small, if they are cosmetic only, escutcheon pins from someplace like Jamestown Distributors might be a solution.
Re: 1/32" Round Head Rivets
Posted: Thu Sep 28, 2017 1:15 pm
by Fender
A #20 escutcheon pin is 0.035" diameter, pretty close to 1/32".
Re: 1/32" Round Head Rivets
Posted: Sat Sep 30, 2017 6:39 am
by Sandiapaul
Try here:
http://sapphireproducts.co.uk/641t1.htm
I bought some from them a while back
Re: 1/32" Round Head Rivets
Posted: Mon Oct 02, 2017 7:40 pm
by AMc
This outfit is a abvertisersis in Model Engineering Magazine.
http://sapphireproducts.co.uk/641t1.htm
1/32 to 2in in dia...