Hi All
Is there anyplace in the states that stocks 1/32" rivets?
Thanks
Tim
1/32" Round Head Rivets
-
- Posts: 1598
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
1/32" Round Head Rivets
He who dies with the most unfinished projects: Should of put more time into their hobby.
Re: 1/32" Round Head Rivets
Once you get that small, if they are cosmetic only, escutcheon pins from someplace like Jamestown Distributors might be a solution.
John Brock
Re: 1/32" Round Head Rivets
A #20 escutcheon pin is 0.035" diameter, pretty close to 1/32".
Dan Watson
Chattanooga, TN
Chattanooga, TN
-
- Posts: 567
- Joined: Wed Jan 07, 2004 8:04 am
- Location: Princeton, NJ
Re: 1/32" Round Head Rivets
This outfit is a abvertisersis in Model Engineering Magazine.
http://sapphireproducts.co.uk/641t1.htm
1/32 to 2in in dia...
http://sapphireproducts.co.uk/641t1.htm
1/32 to 2in in dia...
Last edited by Harold_V on Tue Oct 03, 2017 12:08 am, edited 1 time in total.
Reason: to correct link which was not functional
Reason: to correct link which was not functional