Prototype Drawings for Westinghouse Compound Air Pump & Pyle's Turbo Generator

[Dor_Crank]

Hi,

Does anyone have or point me to above drawings? Fully assembled dimensions would be needed so i can check my
Accucraft 1/32 scale live steam PRR E6s model. I think the casting is a bit too narrow (depth) if not bit small for H x W.

Same for Pyle Nat'l's Turbo Generator drawings with dimensions on PRR locos but needn't be PRR specific. After all
both are generic accessories functionally!

Precision Scale Co (PSC)'s large scale catl. may have the 1/32 scaled air pump but i need dimensions. Their TurboGen
is too big at 1/24th scale.

Attached the 1/32 scaled model w those 2 items.

Please help to get prototype drawings.

Thx!

[Dor_Crank]

Oops! I've already asked this question. Just look at photos and go back to the other one please.
Thx! Sr. Moment/staying up past 2AM i guess. Sorry.