Blower

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

User avatar
Fred_V
Posts: 4370
Joined: Sun Jan 12, 2003 3:26 pm

Re: Blower

Post by Fred_V »

maybe it's higher RPM than mine.
Fred V
Pensacola, Fl.
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Blower

Post by Bill Shields »

They have 5 or six varieties all appear the same to a picture.
Too many things going on to bother listing them.
FRED DADDI
Posts: 62
Joined: Tue Jun 21, 2011 2:53 pm

Re: Blower

Post by FRED DADDI »

Bill Shields wrote:Fred:

If you need a better picture, I can do that. If you want to SEE IT I will be at PLS boiler test day end of April.

I can do dimensioned drawings if you want...but I need to know stack info....
No need for a drawing . Not impressed with the blower may het one like i had for redundancy.


Sent from my iPhone using Tapatalk
FRED DADDI
Posts: 62
Joined: Tue Jun 21, 2011 2:53 pm

Re: Blower

Post by FRED DADDI »

Ya know I cant really find a blower and am going to take up where I left off. Going to try one if the angled pipe adapters earlier in the thread. Bill what do you have? Maybe snap a picture?


Sent from my iPhone using Tapatalk
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Blower

Post by Bill Shields »

I have one of the grainger blower units described. I am away from home for a week and cannot take a picture right now but will do so this weekend.

Theae blowers move plenty of air. Two of them drive tbe coal furnace I use to heat my house. Tim just bought one for out Tom Thumb project and it does just fine.
Too many things going on to bother listing them.
User avatar
Fred_V
Posts: 4370
Joined: Sun Jan 12, 2003 3:26 pm

Re: Blower

Post by Fred_V »

This is a nice size unit.
Dayton blower 1TDP7
tons of them on ebay. 146 CFM
Fred V
Pensacola, Fl.
FRED DADDI
Posts: 62
Joined: Tue Jun 21, 2011 2:53 pm

Re: Blower

Post by FRED DADDI »

I have a 1TDN 2 from grainger


Sent from my iPhone using Tapatalk
User avatar
Fender
Posts: 3084
Joined: Wed May 02, 2007 8:33 pm
Location: Chattanooga TN

Re: Blower

Post by Fender »

Fred_V wrote: Sun Nov 12, 2017 8:55 am here is another way of doing it that works well too but more bulky. This design doesn't heat up or soot up the fan.
Fred,
With this type blower, how far does the smaller pipe, coming in from the side, extend up inside the larger pipe?
Dan Watson
Chattanooga, TN
User avatar
Fred_V
Posts: 4370
Joined: Sun Jan 12, 2003 3:26 pm

Re: Blower

Post by Fred_V »

Fender wrote: Thu Jun 21, 2018 10:33 am
Fred_V wrote: Sun Nov 12, 2017 8:55 am here is another way of doing it that works well too but more bulky. This design doesn't heat up or soot up the fan.
Fred,
With this type blower, how far does the smaller pipe, coming in from the side, extend up inside the larger pipe?
On mine it doesn't stick inside at all; just grafted onto the side of the big pipe.
Fred V
Pensacola, Fl.
User avatar
Fender
Posts: 3084
Joined: Wed May 02, 2007 8:33 pm
Location: Chattanooga TN

Re: Blower

Post by Fender »

One thing not really discussed in this thread is the difference between propane and coal firing. With propane, not much draft is needed, just enough to clear the combustion gases from the firebox. On a large coal- burner, a lot of draft is needed to get a vigorous fire going to raise steam. I believe the smaller blowers may be inadequate for a large coal-burner.
Dan Watson
Chattanooga, TN
User avatar
Bill Shields
Posts: 10459
Joined: Fri Dec 21, 2007 4:57 am
Location: 39.367, -75.765
Contact:

Re: Blower

Post by Bill Shields »

as I mentioned (sorry I was not clear on this)…

the blower that I use on my locos (which are both propane and coal), I also use on my home furnace, which basically has an 8" x 10" grate covered in anthracite coal...and it makes plenty of blow to make things go...

now maybe PUSHING air vs. PULLING air may make a significant difference...
Too many things going on to bother listing them.
User avatar
NP317
Posts: 4557
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: Blower

Post by NP317 »

Bill Shields wrote: Tue Jun 26, 2018 11:57 am as I mentioned (sorry I was not clear on this)…

the blower that I use on my locos (which are both propane and coal), I also use on my home furnace, which basically has an 8" x 10" grate covered in anthracite coal...and it makes plenty of blow to make things go...

now maybe PUSHING air vs. PULLING air may make a significant difference...
So that means you actually have a Sucker and not a Blower??
~RN
Post Reply