LITTLE ENGINES

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: Harold_V, cbrew

User avatar
Comstock-Friend
Posts: 92
Joined: Fri Apr 23, 2010 9:05 am
Location: Sun Valley, California

Re: LITTLE ENGINES

Post by Comstock-Friend » Wed Dec 06, 2017 6:10 pm

Dick_Morris wrote:I built a RRSC CP-173 and have a set of Drawings for the Disney version. While they both have the same prototype, they are very different locomotives. The Disney version is a more complex design and has more detail.
Dick, please check your PM's. I have a similar project (CP173/V&T #18 Dayton) I'd like to discuss with you.

John Friend

paralleler
Posts: 9
Joined: Tue Apr 18, 2017 11:22 am

Re: LITTLE ENGINES

Post by paralleler » Tue Jan 02, 2018 1:06 pm

First my thanks to Mike, Steve, those preserving our heritage, and those having morals.

Two points I'd like to add are legacy and design changes. I recently became the caretaker of the Dave Gumz 4-6-0 built from castings and drawings by Warren Weston. Sadly the locomotive did not come with drawings and maintenance will be required. Fortunately a friend from the Golden Gate Live Steamers (GGLS) gave me two boxes filled with Modeltec magazines and said they're in there. Dig, dig, dig and I found 25 issues discussing the build with many drawings. I also found an advertisement for Warren and I gave him a call. Turns out he had had a stroke, the family downsized, and apparently all the drawings and patterns were tossed. Groan... (ref. thread: Dave Gumz' 4-6-0 4-3/4" Narrow Gauge).

Second is design changes. A few years back I purchased a partially built Little Engines 0-4-0T from an estate; Burt Miller had begun construction on it around the late 1980s. The piping was beyond my ability and I took it to a "locomotive works" to be completed (that's another story). The builder followed the supplied throttle drawings but then discovered the 0-4-0T had a smaller diameter smoke box. He said that's okay, he'd shorten pipes and make it fit. The problem with that idea was the throttle could only be full open or full closed. One good thing was that the builder had a good rapport with Mike of Little Engines who basically said, "Oh yeah, there's a new drawing" (2002 vs. 1982). Fortunately Mike sent the drawing and third time was a charm. Once again, thank you Mike! Fortunately I made sure to pick up the drawings when I took delivery.

There are those of us old enough to remember Napster and those having morals. An acquaintance at work used to call me a fool for spending a $1/song on iTunes rather than stealing it with Napster. The legal system caught up with Napster but that took a lot of money. Companies like Little Engines and Allen Models possibly don't have the deep pockets like Sony, et. al. Morals & ethics, something a few need to learn about.

"History makes you smart, heritage makes you proud", "To Infinity & Beyond!" and have a safe & prosperous new year!

https://www.youtube.com/watch?v=fkP7l8Jyi2s

Post Reply