H Series GN 4-6-2 Valve cage Blue Print
Posted: Sat Nov 25, 2017 7:18 pm
Since I joined the Chaski I've been trying to think of a way to at least contribute something, other than my opinion.
So my building of a PRR K4 is slow and not much to show.
But going through some blue prints that have been stored in a attic. I finally have an area to really look at them. A flat bed scanner that can scan some of the small ones.
With a recent post about blue prints here I hope this does not cause a huge copyright problem.
Hope this may help someone or at least show difference from scale to the full size.
Thanks for the help over the years
Clint
So my building of a PRR K4 is slow and not much to show.
But going through some blue prints that have been stored in a attic. I finally have an area to really look at them. A flat bed scanner that can scan some of the small ones.
With a recent post about blue prints here I hope this does not cause a huge copyright problem.
Hope this may help someone or at least show difference from scale to the full size.
Thanks for the help over the years
Clint