Page 2 of 2
Re: Reflex Water Glass for 3/4-1" Scale Locos
Posted: Wed Dec 06, 2017 5:34 am
by Builder01
The gauge glass at the IBLS site is a "flat style" gauge glass, but, I do not think is it a "reflex" type. The back of the gauge is completely solid.
David
Re: Reflex Water Glass for 3/4-1" Scale Locos
Posted: Wed Dec 06, 2017 4:46 pm
by david griner
Yes Pete, the tube is encased in the body with provisions for teflon disks(washers) at both ends of the tube. The top piece for the steam is threaded and screws into the top of the body, thereby compressing the tube between the two gaskets.
Re: Reflex Water Glass for 3/4-1" Scale Locos
Posted: Wed Dec 06, 2017 5:03 pm
by 10KPete
david griner wrote:Yes Pete, the tube is encased in the body with provisions for teflon disks(washers) at both ends of the tube. The top piece for the steam is threaded and screws into the top of the body, thereby compressing the tube between the two gaskets.
Ah, yes. Nice and simple. Nice!
Thanks,
Pete
Re: Reflex Water Glass for 3/4-1" Scale Locos
Posted: Wed Dec 13, 2017 5:48 pm
by wewilliams
Could not find a scale reflex - but I did find some nice cut away diagrams on this page:
http://batamniagaperkasa.com/products/1 ... 4-3-2.html