Page 1 of 1

material to make leaf spring leafs

Posted: Sun Jan 28, 2018 5:09 pm
by michaellynn2
I need to make leaf springs. Anyone know where I can find a supplier for leaf spring strips material. I need 5/16" or 1/2" wide. The thickness is not all that important. Thank you folks

Re: material to make leaf spring leafs

Posted: Sun Jan 28, 2018 5:32 pm
by Fender
McMaster Carr. Look for 1075 spring steel strips.

Re: material to make leaf spring leafs

Posted: Sun Jan 28, 2018 6:31 pm
by michaellynn2
Thank You Dan

Re: material to make leaf spring leafs

Posted: Sun Jan 28, 2018 8:31 pm
by Fender
YW. Most people suggest buying the pre-tempered stock. It can be curved in that state, and this avoids the need for heat treating. You will need to punch any holes or drill with carbide drills.

Re: material to make leaf spring leafs

Posted: Mon Jan 29, 2018 8:44 am
by Fred_V
i have always used "sewer tape", available at hardware stores. it is a bit thicker but works well and is cheap.