is this anybody here??

This forum is dedicated to the Live Steam Hobbyist Community.

Moderators: cbrew, Harold_V

Post Reply
utahwestie
Posts: 104
Joined: Fri Dec 11, 2015 12:55 pm
Location: Salt Lake City, Ut

is this anybody here??

Post by utahwestie »

Hello all,

I'd like to get in contact with the following YouTube user about the CAD work he is doing. If anyone knows anything or can point me in the right direction, i'd appreciate it.

https://www.youtube.com/watch?v=Ia9iPW9 ... dex=2&t=0s


Thanks in advance.
Anthony.
~Anthony~
~Ex Pat Kiwi now living in Salt Lake City, Utah
User avatar
cbrew
Posts: 3161
Joined: Sat Jan 04, 2003 12:17 pm
Location: Vancouver Wa

Re: is this anybody here??

Post by cbrew »

sure looks like curtis s ferrington's work.
If it is not live steam. its not worth it.
utahwestie
Posts: 104
Joined: Fri Dec 11, 2015 12:55 pm
Location: Salt Lake City, Ut

Re: is this anybody here??

Post by utahwestie »

Thanks CBrew,

You don't happen to have an email address for Curtis do you? If you do, or any other means of contact, you could PM me, as i'm sure like many he'd rather not his information be put out there without consent.

Cheers
Anthony.
~Anthony~
~Ex Pat Kiwi now living in Salt Lake City, Utah
User avatar
cbrew
Posts: 3161
Joined: Sat Jan 04, 2003 12:17 pm
Location: Vancouver Wa

Re: is this anybody here??

Post by cbrew »

utahwestie wrote: Wed Feb 28, 2018 3:14 pm Thanks CBrew,

You don't happen to have an email address for Curtis do you? If you do, or any other means of contact, you could PM me, as i'm sure like many he'd rather not his information be put out there without consent.

Cheers
Anthony.
he is a member on the board. you can look him up under Curtis_F in private messaging
If it is not live steam. its not worth it.
utahwestie
Posts: 104
Joined: Fri Dec 11, 2015 12:55 pm
Location: Salt Lake City, Ut

Re: is this anybody here??

Post by utahwestie »

Thank you all,
I got hold of Curtis.

Thanks again.
~Anthony~
~Ex Pat Kiwi now living in Salt Lake City, Utah
Post Reply