Hi All
This is the last installment on the re painting of the 1361. I also show how I re plated the rods.
https://www.youtube.com/watch?v=Cwuppi0HS20
REPAINTING THE K4 PART 4
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
REPAINTING THE K4 PART 4
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
- Dan Willey
- Posts: 485
- Joined: Wed Feb 19, 2003 10:44 pm
- Location: North Carolina, USA
Re: REPAINTING THE K4 PART 4
Hi Dave,
Beautiful locomotive... and paint job!
Did you remove the rod bearings/bushings before re-plating?
Dan
Beautiful locomotive... and paint job!
Did you remove the rod bearings/bushings before re-plating?
Dan
1/8 scale: Mercer Locomotive K4, Saturated Steam E6
Full scale: Woodings CBL speeder/motorcar NARCOA
Full scale: Woodings CBL speeder/motorcar NARCOA
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: REPAINTING THE K4 PART 4
Yes I did
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES